<p>Description: 1.Use high-quality materials, durable</p> <p>2.Constant voltage and constant current CNC DC stabilized voltage power supply</p> <p>3.Large screen display, full view dedicated power LCD</p> <p>4.Support serial communication and standard MODBUS protocol</p> <p>5.Complete display, simple operation and stable performance</p> <p>Type: Voltage Regulator</p> <p>Parameters: </p> <p>Input voltage: 6.0~70V</p> <p>Output voltage: 0.0~60V</p> <p>Output current: 0~20.00A</p> <p>Output power: 0~1200W</p> <p>Maximum output voltage: (input voltage+1.1)-2</p> <p>Input voltage measurement resolution: 0.01V</p> <p>Output voltage setting measurement resolution: 0.01V</p> <p>Current setting measurement resolution: 0.01A</p> <p>Input voltage measurement accuracy: 1%+5 characters</p> <p>Output voltage setting and measurement accuracy: 0.4%+1 word</p> <p>Output current setting and measurement accuracy: 0.5%+3 words</p> <p>Cooling fan on: current Greater than2A power Greater than50W temperature Greater than50</p> <p>Turn off the cooling fan after it is turned on: current Less than1.5A, power Less than45W, temperature Less than45C</p> <p>Protection mechanism: </p> <p>External temperature protection: 0-110C default off</p> <p>Input overvoltage protection: 71V default</p> <p>Input undervoltage protection: 4.8-71V adjustable default 4.8V</p> <p>Output overvoltage protection: 0-65V Default: 65V</p> <p>Output overcurrent protection: 0-16A, default 16A</p> <p>Output over power protection: 0-950W Default: 950W</p> <p>Over temperature protection: 60-110C, 95C by default</p> <p>Timeout protection: 0-100H adjustable default off</p> <p>size: 109 x 72 x 42mm </p> <p>Material: PCB+electronic component</p> <p>colour: black</p> <p>Package Contents: </p> <p>1 x XY6020L Single board</p> <p>1 x module</p> <p>2 x cable</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>