Water Tester Ph Chlorine Meter, Chlorine Meter Meter Water Tester Betterlifefg

Water Tester Ph Chlorine Meter, Chlorine Meter Meter Water Tester Chlorine Test - Adjustment Points: Before first use, adjust the tester for the pool or hot spring water to be tested in the following order: 1. Use traditional liquid testing tools to test swimming pool water or hot spring water; 2. Record the chlorine reading for backup (1.5PPM); 3. No adjustment to pH is required. Find the adjustment point of the tester: A. Place an AA 1.5 V battery (positive side up) in the handle's battery compartment. B. Hold the tester in one hand and the test stick in the other. C. Insert the cleaned metal rod into the water to the black position. D. Gently stir the water with a metal rod. E. When the metal rod is kept in the water, turn the knob on the front of the watch to the CL direction until it can no longer move. Then slowly back to the right until the pointer points to the traditional The position of the result measured by the liquid test tool (eg 1.5). F. Remove the test rod from the water, being careful not to move the knob. The pointer will slide to the right, stopping at a letter between A and E. This letter is the adjustment point. NOTE: The meter must be adjusted to the "adjustment point" before each chlorine test. Test pH: The recommended chlorine level for swimming pool or spa water is 7.2 to 7.8 A) Let the test rod stay in the water, turn the knob in the direction of pH until a beeping sound (the battery must be removed when reading the pH value). B) Wait until the pointer stops wiggling and take a pH reading. C) Gently dry the test stick, insert it into the slot next to the tester, and store it. The company has always adhered to the tenet of "high quality, high efficiency, new technology and new management". "Innovative development, quality first, customer first" is the business philosophy, to provide customers with various creative and innovative products. We emphasize team innovation, and every step in the development process is the result of teamwork, creativity and computer use. Test for chlorine content: The recommended chlorine level for swimming pool or spa water is 1.2 to 1.7ppm A) Move the pointer to the "adjustment point" position. B) Holding the tester in one hand and the test rod in the other, insert the metal rod into the water to the black position. Wait until the pointer stops swinging to take the reading. C) Let the test stick stay in the water and continue the pH test according to the instructions. Specification 1. Essential tools for swimming pools, saunas and spas 2. The ideal tool for simply measuring the pH and C12 values ​​of water 3. No chemical composition, no more guesswork 4. Chlorine level within safe measurement range: 1.2-1.7ppm 5. PH level within safe measurement range: 7.2-7.8 6. Battery: Use 1 AA battery (not included in shipment) Storage method: To extend the life of the swimming pool tester PC-101 and ensure accurate measurements, caution: 1. When not in use, please turn the knob to the off position (towards the PH direction until it can no longer move). 2. Store in a cool, dry place, avoid direct sunlight. 3. Do not immerse the test rod in other liquids except swimming pool water and hot spring water. 4. Periodically check that the battery is fully charged - the tester uses an "AA" 1.5 V alkaline battery 1. Due to different lighting and screen settings, the color of the product may be slightly different from the picture. 2. Due to different sizes, please allow slight size differences. Size: 11.5*17cm Shipping color: white Quantity shipped: 1