Application range: can be applied to the surface of the materails such as hardware(brass,iron,aluminum,copper,etc.),wood,plastic(ABS,PU,PP,PE,PVC,etc.),stone,ceramic,glass,etc. Applicable industries: autos, electronic products,household appliance,daily arts and crafts,indoor,footwear,sports apparatus,etc. Tensile properties, pattern is not easy deformation. Environment friendly , it will not bring pollution to the natural environment. Not easy to fade; waterproof ; enduring aesthetic appearance. Water fer film , also called cubic fer printing, is a way to do the printing on the surface that is irregular, which overcomes the problem facing offset printing that can not reach the tongued and grooved face. Water Operation Temperature: 25-35Celsius Thickness: 003mm Size: 05*2m Color:color Material:PVA Pattern:Pig recorder Graffiti How To Use: 1Base coating: Mix well the paint obtaining the color that you need. 2Film selections: Select printing film that you need. 3Place film: Cut out the fit size, place it flatly on water surface. 4Activation: Spray the activator uniformly on the film after placing the film on the water 60-90 seconds. 5 fer: Keep 35 degrees, with a fixture alignment film paper uniform downward pressure. 6Soaking: About 30 seconds. 7Washing: Remove the remaining film. 8Drying: Remove the product' surface water. Storage : The film should be covered by plastic when store. A heavy / dark trash bag is perfect. Film Storage: 18-25Celsius Optimum Temperature: 215Celsius Humidity: 45-65% Do not open until to use to prevent contact with the . Water fer Printing Film is a Hygroscopic Substance. It has the ability of attracting and holding water molecules from the surrounding environment Do not store near water or in the room where your dip tank is located. Avoid direct sunlight. Package Contents: 1 x Water fer Printing Film Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.