Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

€ 9,95
+ € 7,49 Versand

Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

  • Marke: Unbranded
Verkauft von:

Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

  • Marke: Unbranded

€ 9,95

Bespaar € 10,00 (50%)

UVP

€ 19,95
Auf Lager
+ € 7,49 Versand
Verkauft von:

€ 9,95

Bespaar € 10,00 (50%)

UVP

€ 19,95
Auf Lager
+ € 7,49 Versand

Wir akzeptieren die folgenden Zahlungsmethoden

Beschreibung

brand new and high quality Features: White thixotropic elastomer.Good cold and hot tolerance.No peeling and good disassemble after long for time usage. Excellent in cold and high alternating resistance.It has great adhesion,insulation and dissipation. You can use it to get more reliable filling heat,simpler process and more economic cost. It is mainly used in range of fill, bond, and seal in electronics,the for gap between CPU and radiators,the filling of high-power electronics modules and radiators,etc. Thermal Conductive Silicone only, other accessories demo in the picture is not included! Specification: Temperature: -60~280 degrees Material: Silicone Rubber Dimensions: 13.2x3.9cm/5.2x1.54inch Capacity: 80g Color: White Quantity: 1 Pc Note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Thermal Conductive Silicone How To Use: Preparation:Clean the un-bonded or uncoated surfaces by removing the rust, ash, and oil, etc. Application:Pierce the opening with the tip of the cap. Fix the nozzle, and coat the clean surface evenly with the adhesives, then bond the two surfaces. Curing Condition:The curing progress is from outer surface into inner surface.The elastomer get cure with the depth of 2~4mm in 24 hours (at room temperature, 55% moisture). if the bonded parts is too deep (especially the parts not easy to contact with air) or the temperature is too low, the full curing for time will be extend. Advise user preparing enough for time to let elastomer get full cure in order to keep the properties stably. Tips:After the application,screw its nozzle tightly and store in dry and cool place for next for time using.There may be some cured gel around the opening when you use it again,just remove the cured,and use the uncured. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Minnanxin
  • Fruugo-ID: 409564215-867314257
  • EAN: 6092010843665

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Produktsicherheitsetiketten

CE Mark
Sicherheitswarnungen: Not suitable for children under 36 months
Zutaten: Plastic 5%

Lieferung und Rückgaben

Versand innerhalb von 24 Stunden

  • STANDARD: € 7,49 - Lieferung zwischen Do. 06 November 2025–Fr. 14 November 2025

Versand von China.

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Minnanxin 03
  • Putian Minnanxin Trading Co., Ltd.
  • Room 2402, Building 11, Area B, Oushi Lingxiu, No. 333 Huaxiu Road
  • Longqiao Subdistrict, Chengxiang District
  • Putian
  • CN
  • 351100
  • nanxinmin01@outlook.com
  • 8615260999837

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • C/ PABLO IGLESIAS 1A ENTRES
  • Castellon De La Plana
  • ES
  • 12001
  • contact@ibertrust.info
  • 0034 964818867