1Vector network analyzer use 0.5ppm TCXO to guarantee high frequency measurement accuracy 2The complete metal shell can totally protect the internal accurate circuit while considering the protection of the external interface 3High-performance calibration kit to guarantee that the calibration SWR is less than 1.03 when up to 3GHz 4Made of aluminum alloy material, light weight with good strength and good corrosion resistance 5This product possess stable structure and excellent performance, practical and accurate analyzer Item Type: Vector Network AnalyzerMaterial: Aluminum alloyFrequency Range: 50kHz-3GHzFrequency Error: <2ppmFrequency Temperature: <0.5ppmSystem Dynamic Range(calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)S11 Noise Floor(calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)Scanning Speed: 100 Points/secDisplay: SAA2 2.8 inches, 320 x 240; SAA2N 3.95 inches, 320 x 480RF Port: SAA2 SMA; SAA2N N(If you need to measure anti-pin SMA devices such as Wifi antenna, please use SMA to RPSMA connector)USB Interface: MicroUSBPower Supply: USB, maximum charging current 1ABattery: SAA2 2000mAh lithium ion; SAA2N 3000mAh lithium ionBattery Connector: JST-XH 2.54mmMaximum Scanning Point(on the device screen): 201Maximum Scanning Point(USB): 1024Port 2 Return Loss (1.5GHz): 20dB typPort 2 Return Loss (3GHz): 13dB MINVNA-QT Software Compatible System: For Linux/Windows(7+)/OS X planned 1 x SAA-2N Host(built-in 3000mAh battery)1 x USB Data Cable2 x 50cm N Male to Male RG142-PUR RF Cable1 x N Simple Calibration Kit OPEN1 x N Simple Calibration Kit SHORT1 x N Simple Calibration Kit LOAD1 x N Female to Female Connector1 x Lanyard1 x User Manual1 x Storage Box Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.