Compatibility: Replacement strip compatible with Festool 495209 and 495207 splinter guards. Fits Festool FS/2, FS/2 KP, FSK guide rails, and Festool rail saws. Regular replacement helps maintain splinter-free cuts, especially when switching materials or using the guide rail with multiple saws.Function: Replace the splinter guard as needed to ensure accurate alignment of the guide rail with the cutting line and to prevent material tearing during parallel and lateral cuts. The splinter guard aligns precisely with the saw blade, improves cutting accuracy, and reduces setup time. Clear design enhances visibility of the cutting line.High Quality: Made from high-quality soft rubber with strong adhesive backing. Offers high clarity and durable adhesion to the guide rail, resisting peeling during use.Easy to Replace: Pre-cut edge matches the exact cutting depth upon first use, allowing precise placement at the scribe mark. Simply remove the protective tape before application. Note: Clean the guide rail thoroughly with acetone and ensure the surface is free of grease and debris before installation.Installation Tips: - Work on a clean surface to avoid dust or debris adhering to the adhesive. - Peel off the protective liner carefully to prevent trapping debris. - Remove any residual adhesive from previous installations using a scraper and acetone before applying a new strip. - When reapplying, position the splinter guard slightly offset if needed to ensure a clean cut.Color: As shown in photo Material: Plastic Package Contents: 1 x Splinter Guard Replacement Strip Note: Lighting and display settings may cause slight color variations.