Front Screen Outer Glass Lens for iPad Pro 9.7 inch (Models A1673, A1674, A1675) Before Installation Notes 1. Test before installation. Do not remove any protective film or tags during testing. Be aware of static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal electronic components. Wear eye protection and handle with care to avoid injury from glass splinters. 2. Simulated testing is recommended. Screen replacement is a delicate component. We strongly recommend performing a simulated test before full installation: disconnect the device, connect the motherboard and LCD/screen assembly with the audio cable, then power on to verify functionality. If the test is successful, proceed with installation. If the display does not function, immediately. Do not force installation. We are not responsible for units after installation. 3. Avoid over-bending the LCD cable. Ensure the LCD cable is not bent beyond 90 degrees, as excessive bending may result in a black display. Product Information 1. Replacement front screen outer glass lens for iPad Pro 9.7 inch (Models A1673, A1674, A1675). 2. Replace damaged or nonfunctional glass with a new unit. 3. Restores the appearance of your device. 4. Designed for precise fit and full compatibility. 5. Each unit is inspected and verified to be in good condition prior to shipment. 6. Professional installation is highly recommended. We are not responsible for units after installation.