Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

€ 54,00
+ € 16,49 Versand

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Marke: Unbranded
Verkauft von:

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Marke: Unbranded
UPE: € 169,00
Preis: € 54,00
Sie sparen: € 115,00 (68%)
Verkauft von:
€ 54,00
+ € 16,49 Versand

Auf Lager

Wir akzeptieren die folgenden Zahlungsmethoden

Beschreibung

1Welding power can be powered by lithium battery or 12V car battery. 2The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters. 3The soldering pen and the input wire are connected by Ushaped coldpressed terminals, which is convenient for disassembly and replacement. 4The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage. 5The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multiwire soft wire to increase the overcurrent capacity. 6Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion. 7The controller is mainly for welding 0.1mm to 0.15mm nickelplated steel strip, and the power input adds a 25V10000uF highfrequency lowresistance capacitor for energy compensation to increase stability.Item Type: Mini Spot WelderProduct Description:1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in1 x Spot Welder1 x Connector2 x Power Input Line2 x Soldering PenPlease note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Fruugo-ID: 341577521-748850994
  • EAN: 653582880708

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Produktsicherheitsetiketten

CE Mark
Sicherheitswarnungen: Not suitable for children under 36 months, Adult supervision recommended

Lieferung und Rückgaben

Versand innerhalb von 3 Tagen

  • STANDARD: € 16,49 - Lieferung zwischen Mi. 22 Oktober 2025–Mi. 29 Oktober 2025

Versand von China.

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Chengdu Qingbin Tai Trading Co., Ltd
  • Chengdu Qingbin Tai Trading Co., Ltd
  • No. 1309, 13th Floor, Unit 1, Building 2, No. 68, Zhiquan Section, East Street, Jinjiang District, Chengdu City, Sichuan Province
  • Chengdu
  • China
  • 610065
  • chenghduyubin5542@outlook.com
  • 86 134 21832945

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • REP Europe GmbH
  • REP Europe GmbH
  • Prinzenallee 7
  • Düsseldorf
  • Germany
  • 40549
  • info@rep-europe.de
  • 49 155 60128437