(1) Preferred model for 10 inch screen in general application. (2) Non hollowing mask is more effective for oily environment. (3) Beautiful appearance, ultra-thin body (4) Super cost performanceDescription (5) Note: There are no programs in the touch screen. Please make sure you have a program or know how to program before purchasing. If there is no program, you cannot directly replace the screen on the device, so please be careful when purchasing! ! Due to different production batches, there may be slight differences in products, which does not affect use. Product Name:Human Machine Interface Display Display size:10Inch TFT Resolution:1024x600 px CPU:ARM RISC 32Bit 800MHz Display area:227.72(W)x125.28(H) Display color:16.77M true color Visual angle:70/70/60/70(L/R/U/D) Contrast:500:1 Backlight:LED Luminance:400cd/m² LCD life:Greater than 30000 hours Touch panel:4-wire precision resistance network (surface hardness 4H) Memory:256MB Flash Memory+ 128MB Memory RTC:Built-in RTC External storage:1USB Host Printer port:USB Host/Serial port Communication COM0:RS232/RS485/RS422.COM2: RS232. Electrical Specification: Input range:DC10V-DC28V,inbuilt isolated power supply Power:6W@DC24V Allowable loss of power:Less than 3ms Insulation resistance:Greater than 50Mohm@ 500V DC Hi-pot test:500V AC 1 minute Environmental Specification: Working temperature:0℃-50℃ Working humidity:10-90%RH (non-condensing) Storage temperature:-20℃-60℃ Storage humidity:10-90%RH (non-condensing) Sine vibration test:10-500Hz, 30m/s², X,Y,Z direction/hour Cooling mode:Natural air cooling Configuration software:for Kinco DTools V4.1 and above version Type:GL100E with Ethernet:LAN0:10/100 Mbps Colour:Black-Gray Mat