Hot Stone Nozzle Patch - Quick Ironing Solution

about this item This is a DIY hot fix rhinestone applicator that will make your items with sparkling rhinestones. Compact size, easy to carry.The non-slip handle design is very humanized and gives you a comfortable experience. The ergonomically shaped handle makes it easy to use. Complete with safety stand and 7 different applicator tips for applying hot-fix crystals of different sizes. Your different uses at any time. Only need 2-3 minutes to preheat, easy to use. Built-in temperature controller, the temperature does not need to be adjusted. With a switch, convenient for control and operation. APPLICATION: Wide range of applications for all flat fabric materials, well suited for most types of crystals/rivets/nail beads. Product Description: Technical specifications: Material: ABS shell. Colour: purple. Instructions: 1.Insert the applicator stick and turn it on. Leave on for 2 minutes. 2. Place the tip with the stone on the stone and pick it up. 3. Watch the glue until it is wet and shiny. Now the stone can be applied to the surface. Depending on the size of the rhinestones, it will take around 5 seconds or more. 4. Gently push the applicator at a 90 degree angle to the surface. Move the applicator up and away. If the stone gets stuck in the tip, use tweezers and push it down through the slot in the tip to remove the stone. 5. If the stone is not glued properly, place the tip on the stone for a few seconds to melt the glue again. Scope of delivery: 1 x rhinestone applicator.