Electret Microphone Amplifier Sensor Module GY-MAX4466

€ 7,95
+ € 5,99 Versand

Electret Microphone Amplifier Sensor Module GY-MAX4466

  • Marke: Unbranded
Verkauft von:

Electret Microphone Amplifier Sensor Module GY-MAX4466

  • Marke: Unbranded
UPE: € 32,95
Preis: € 7,95
Sie sparen: € 25,00 (75%)
Verkauft von:
€ 7,95
+ € 5,99 Versand

Auf Lager

Wir akzeptieren die folgenden Zahlungsmethoden

Beschreibung

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried! This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6 inch away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, Perfect for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp! Using it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the "quietest" supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required. The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as 3.7W stereo amp) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decou
  • Fruugo-ID: 424107061-892208588
  • EAN: 7238523479086

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Produktsicherheitsetiketten

CE Mark
Seriennummer: HL7333281681860

Lieferung und Rückgaben

Versand innerhalb von 3 Tagen

  • STANDARD: € 5,99 - Lieferung zwischen Mi. 29 Oktober 2025–Fr. 07 November 2025

Versand von China.

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Wuhan Cuijue E-commerce Co., Ltd.
  • Huiliang Trading Official Store 1
  • 628 Wuluo Road, Floor 30, Block A
  • Zhongnan Street, Wuchang District
  • Wuhan
  • china
  • 430061
  • 18218768550@163.com
  • 13246484773

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • Berrih Ethan
  • DISCOUNT INDUSTRY
  • 10 Rue Des Grands Pres, 60230 Chambly, Oise, France
  • Chambly
  • France
  • 60230
  • DISCOUNT-INDUSTRY@outlook.com
  • 0033 748562127