Duplex Hotspot Board UHF VHF + OLED + Case Kit Support P25 DMR for Zero W 0W 2w 3B 4B

€ 40,95
+ € 10,99 Versand

Duplex Hotspot Board UHF VHF + OLED + Case Kit Support P25 DMR for Zero W 0W 2w 3B 4B

  • Marke: Unbranded
Verkauft von:

Duplex Hotspot Board UHF VHF + OLED + Case Kit Support P25 DMR for Zero W 0W 2w 3B 4B

  • Marke: Unbranded
UPE: € 64,00
Preis: € 40,95
Sie sparen: € 23,05 (36%)
Verkauft von:
€ 40,95
+ € 10,99 Versand

Auf Lager

Wir akzeptieren die folgenden Zahlungsmethoden

Beschreibung

Description Supports DMR, P-25, D-Star and System Fusion Fully tested. Onboard LED to show status (TX, RX, PTT, Mode) Mounts cleanly on all current s including the Pi Zero W 2W/3B/4B WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion WORK with RASBERRY Pi: Mounts cleanly on current including the Pi Zero W 2W/3B/4B.Mode: Support both Duplex mode and Simplex mode Differencs in Duplex and Simplex:in Duplex mode,have 2 time slots, and Tx and Rx can do at the same time Radio Frequency : in duplex mode,support uhf 430-440MHZ, in simplex mode support both uhf 430-440MHz and vhf 140-150MHz Best adjusted: TX =0, RX=0,need no offset. Modem select: STM32-DVM/MMDVM_HS- Hat(GPIO) Aluminum alloy shell:High RF performace LEDs:on board leds to show status, with status words on shell How to write WiFi detail into the Hotspot: Method 1: Generate WiFi config file, and plug it into TF card. We need a TF reader.Put our TF card into this TF reader and plug this into our computer. Go tohttp://.pistar.uk/wifi_builder.phpand then fill your WIFI name into the SSID, password into the , click submit. Then the file wpa_supplicant.conf is generated. Drag this file into your TF cards boot path. And plug the card into your hotspot. Power up your hotspot, and wait for 1-2minutes.Then we go tohttp://pi-starand play with the settings. Please keep this in mind that gadget only support 2.4 Gigahertz router, and it does not work with 5.8G router. Colour:white+black Material:PCB+electronic components+aluminum alloy Package Contents: 1 x Hotspot Board 1 x Shell with mounting screws Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo-ID: 404625033-858655114
  • EAN: 8936090720974

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Produktsicherheitsetiketten

CE Mark
Sicherheitswarnungen: WARNING! NOT TO BE EXPOSED TO INFANTS AND CHILDREN, MAY CAUSE CHOKING!
Zutaten: Octinoxate 6.5%
Teilenummer des Herstellers: XH330133
Modellnummer: XH530133
Seriennummer: XH130133
Chargennummer: XH730133

Lieferung und Rückgaben

Versand innerhalb von 24 Stunden

  • STANDARD: € 10,99 - Lieferung zwischen Mo. 27 Oktober 2025–Mi. 29 Oktober 2025

Versand von China.

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen