Specification Genset Controller DC60D Series This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop,Parameters monitoring, faults-checking as well as data setting. 4.3 inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words.Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to users request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC.It can be widely applied for all kinds of auto control system of gensets. Parameters Display: Engine RPM Engine oil pressure Engine water temperature Engine fuel temperature Engine cylinder temperature Engine Tank temperature Engine fuel level Engine battery voltage Charging voltage Mains Frequency (only for DC62D) Mains phase voltage L-N(only for DC62D) Mains phase voltage L-L(only for DC62D) Generator 3 Phase voltage L-N Generator 3 Phase voltage L-L Generator 3 phase current A Generator Frequency Hz Generator Power Factor COS Generator active power KW Generator apparent power KVA Generator reactive power KVar Current loading rate % Total average loading rate % Current consumption KWH Total consumption Kwh Total Crank times Current running time Total running time Three classes maintenance notice Protection: Over speed Under speed Low oil pressure High water temperature High Oil temperature High Cylinder Temperature High Tank temperature Low fuel level Low oil level External emergency alarm D+ Opened RPM Lost Sensor Open Over Frequency Under Frequency Over voltage under voltage over current Non-balance of current Over power Lack of Phase reverse phase sequence Gen load failure Gen unload failure Mains Load failure Mains unload failure Primary maintenance expire Secondary maintenance expire Maintenance expire Low water level alarm Emergency Stop Crank failure Over battery voltage Under Battery voltage Charging failure Battery Charging failure Stop Failure Working voltage: DC8V----36V Continuous Power consumption: Standby24VMAX 1W Working24VMAX 5W AC Voltage Input 1P2W 30VAC-276VAC(ph-N) 2P3W 30VAC-276VAC(ph-N) 3P4W 30VAC-276VAC(ph-N) Rotate speed sensor Frequency: 200-10000Hz MAX Accumulating Time: 99999.9HoursMin Store time:6min Fuel Relay Output: 16Amp DC+VE Supply voltage Start Relay Output: 16Amp DC+VE Supply voltage Programmable Relay output 1: 5Amp DC+VE Supply voltage Programmable Relay output 2: 5AMP Non-contact-Normal open--Normal close output Programmable Relay output 3: 5AMP Non-contact Normal Open output Programmable Relay output 4: 5AMP Non-contact normal open output Excitation output: Max 1AMP DC+VE supply voltage Switch value input: Available if connecting with Battery - Working condition; -20-65 Storage condition: -40-85 Protection Level: IP54when waterproof rubber gasket is added between controller and its panel Overall dimension: 210mm*160mm*50mm Panel cutout: 186mm*142mm Weight: 0.9Kg Features 32 units Micro-procession