<p>Working mode:</p> <p>1. Inching mode: press the remote controltherelaywill connect, and thenrelease the remote controlto disconnect the relay.</p> <p>2. Self-locking mode: press the remote controltherelaywill connect, and then press the remote controlagainto disconnect the relay.</p> <p>3. Interlock mode: press the remote control key A toconnect the relay, and press the remote control key B to disconnect relay.</p> <p>4. Delay mode: press the remote controltherelaywill connect, release the remote control and start timing. After 5S, 10S and 15S (3 gears), the relay will be automatically closed.</p> <p>Input Voltage: 12 V, RF working mode: Superheterodyne</p> <p>Receiver sensitivity: more than 97 dbm</p> <p>Transmitting distance: more than 100 m ( open space)</p> <p>Decoding mode: MCU software decoding</p> <p>Remote storage: 20</p> <p>Support remote type: EV1527 learning code</p> <p>Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )</p> <p>Output terminal: NO , NC , COM</p> <p>Remote control battery: 2 x 3 V CR2016 button batteries</p> <p>Note: Maximum input power is 12 V</p> <p>Remote programming</p> <p>Colour: transparent color</p> <p>Material: plastic</p> <p>Package Contents:</p> <p>1 * Receiver module</p> <p>1 * Remote Control (with battery)</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>