Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

€ 42,95
+ € 12,49 Versand

Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

  • Marke: Unbranded
Verkauft von:

Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

  • Marke: Unbranded

€ 42,95

Bespaar € 41,05 (48%)

UVP

€ 84,00
Auf Lager
+ € 12,49 Versand
Verkauft von:

€ 42,95

Bespaar € 41,05 (48%)

UVP

€ 84,00
Auf Lager
+ € 12,49 Versand

Wir akzeptieren die folgenden Zahlungsmethoden

Beschreibung

Description for Mini One Cooper S Convertible R52 (2001-2006) rear hood soft top weather rubber seal repair self adhesive. This product is a DIY rubber repair solution for replacing the worn or cracked rear weather seal on the soft top of the Mini Convertible. It replaces the rubber strip located above the chrome trim that runs along the rear edge above the boot and quarter panels, an area commonly affected by aging and sun exposure. The repair seal is self-adhesive with 3M tape and measures approximately 2 meters in total length. Minor trimming may be required to fit the length and accommodate the third brake light. Instructions: Step 1: Clean the surface thoroughly to ensure maximum adhesion. Step 2: Apply the new rubber strip over the prepared flat edge where the old rubber was removed, slightly overlapping onto the roof material. Use additional adhesive to reinforce bonding. Note: Adhesive sets quickly, so ensure correct placement before application. The new rubber provides a slightly increased profile where it overlaps the chrome, improving both appearance and sealing performance. It helps protect the roof from UV damage and restores weatherproofing. This repair has been tested on an R52 model and proven durable through multiple seasons in various weather conditions. Avoid high-pressure washing of the roof area. Clean with a sponge and rinse with water. For added security, apply a small amount of super glue (not included) in concealed areas to prevent lifting, or use a bead of silicone if needed. For easier installation, the strip can be removed temporarily to allow trimming away from the vehicle, minimizing risk to the roof fabric. Tamper-proof Torx screws under the chrome strip can be accessed by releasing the side latches (boot loading mode), allowing the lower roof section to be tilted up. Support the roof with a suitable prop during work. Package Includes: 1x replacement self-adhesive rubber seal
  • Fruugo-ID: 425741200-894207258

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Sicherheitswarnungen:
  • Keep out of reach of children: Prevent accidental ingestion
  • misuse
  • or harm.

Lieferung und Rückgaben

Versand innerhalb von 24 Stunden

  • STANDARD: € 12,49 - Lieferung zwischen Di. 04 November 2025–Mi. 12 November 2025

Versand von China.

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Jiang Jiamin
  • Shanghai Zhenyou Technology Co., Ltd.
  • Building 1, No. 5601, Yanqian Road Fengxian District
  • Shanghai
  • CN
  • 201400
  • chengchan41525@163.com
  • 13822016759

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149