Bluetooth 4.0 OBD2 Scanner with ELM327 Adapter compatible with Car Engine Error Code Reading and Check Light Diagnostics

Vgate car scanner compatible with your needs! Fully compatible with all OBD2 protocols and commands. Features an auto-sleep / auto-wake function that minimizes power consumption to protect your vehicle’s battery. Note: Auto-wake function is not supported on hybrid or fully electric vehicles. Functional : - Reads both generic and manufacturer-specific diagnostic trouble codes (DTCs). - Fast ARM processor supports up to 30 PIDs per second. - Reads real-time ECU sensor data, including engine speed, fuel system status, fuel pressure, oxygen sensor voltages, and other vehicle parameters. - Supports emissions testing preparation. - Reads and clears trouble codes; turns off the MIL (Check Engine Light). - Views freeze frame data and I/M readiness monitors. - When used with a compatible OBD2 app, additional features become available. Warm tip: compatible with technical support, via email. We respond promptly to assist with any questions. After the engine is turned off compatible with 30 minutes, the Vgate iCar Pro Bluetooth 4.0 enters sleep mode and will not drain your car’s battery. The device automatically wakes when Bluetooth is connected, doors are unlocked, or the engine starts. Compatible with all OBD2/EOBD-compliant vehicles: - EOBD vehicles: petrol vehicles from 2001, diesel vehicles from 2003/2004 (Europe). - OBD2 vehicles: model year 1996 and newer (USA), 1998 and newer (Canada). Designed compatible with 12V petrol vehicles and 12V light-duty diesel vehicles (gross vehicle weight ≤ 6.5T) supporting standard OBD2 protocols. Not compatible with heavy-duty 24V diesel vehicles (e.g., semi-trailers, tractors). Compatible apps: - iOS: BimmerCode, OBD Fusion, OBD Auto Doctor, OBD Car Doctor, JScan - Android: Torque Pro, Torque Lite, JScan, OBD Fusion, OBD Auto Doctor Note: Connect via third-party apps on iOS or Android devices. App functionality varies by application. Connection instructions: - compatible with Android: Select “Android-Vlink” when pairing. - compatible with iOS: Enable Bluetooth, then configure the device name in the OBD app settings. - Plug the Vgate iCar Pro Bluetooth 4.0 OBD2 adapter into your vehicle’s OBD2 port. - Ensure Bluetooth is enabled on your smartphone and pair via Bluetooth. - Launch your preferred OBD2 app and begin diagnostics. Supported protocols: SAE J1850-PWM, SAE J1850-VPW, ISO 9141-2, ISO 14230-4 (slow & fast), ISO 15765-4 (CAN), SAE J1939 (CAN), ISO 11898 (raw CAN) Professional OBD diagnosis tool — part of the iCar series. Low energy consumption. Wide vehicle compatibility. iOS & Android app support. Simple three-step setup: plug in, pair, use.