1、2 Modes: 30LED sensor light has 2 modes. PIR motion sensor mode, fixture on on, short press the remote control S button, if motion is detected, the LED will light up, 20 seconds no motion detected automatically off. Always on mode, long press the mode button for 2 to 3 seconds to switch to always on mode, off turn off the light. 2、3 Gears: The sensor light has 3 gears, respectively 10LED single row light on, 20LED 2 rows light on, 30LED 3 rows light on, short press the mode key on the fixture or the 1 2 3 button on the remote control to easily switch, applicable to various lighting scenes. 3、Remote Control and Timing: There are two ways to adjust the brightness of the sensor light, 50% brightness, stepless dimming, press the + or - key on the remote control. With timing function, 10, 30, 60 or 120 minutes. 4、Easy to Install: The magnetic bracket of the sensor light can be torn off the tape to stick on any flat surface, and then the light can be gently placed on the magnetic bracket to complete the installation, and the light can be disassembled and charged at will. No screws are required, so say goodbye to complicated installations. 5、USB Rechargeable: Sensor light has a built in 600mAh rechargeable battery. Just use the USB cable included with the light to charge. When fully charged, it lights up blue and lasts longer. 6、Widely Used: LED sensor light is suitable for bedroom, closet, cabinet, workshop, garage, stairwell, hallway, storage room, etc.