Portapack H2 Full Featured Radio Transceiver Software Defined Radio with 3.2in TFT Screen

€ 289,20
FREE Shipping

Portapack H2 Full Featured Radio Transceiver Software Defined Radio with 3.2in TFT Screen

  • Brand: Unbranded

Portapack H2 Full Featured Radio Transceiver Software Defined Radio with 3.2in TFT Screen

  • Brand: Unbranded
RRP: € 307,20
Price: € 289,20
You save: € 18,00 (5%)
Sold by:
€ 289,20
FREE Shipping

In stock

We accept the following payment methods

Description

Features 1.Voice Activated Walkie Talkie Radio: Using a 3.5mm audio jack, the transmitter can also be used as a standard push to talk or voice activated walkie talkie radio. 2.Press the Call: Plug the microphone into the audio jack, just press and hold the button on the right, the sender can press the call. 3.NFM WFM Audio Signals: You can easily listen to standard NFM and WFM audio signals by connecting the speaker to the 3.5mm audio jack of the transmitter. 4.Capture Wireless Signal: This transmitter can easily capture and replay the wireless signal from the ISM band remote control. 5.Basic Specifications: This is a HRP01 full featured radio transceiver with a 3.2in TFT 240 x 320 screen. Specification Item Type: Portapack H2 Material: ABS+LCD Purpose: Radio Transceiver Colour: White Antenna Receiving Frequency Range: 1MHz-6GHz Capture Replay: One of the best things about PortaPack is that can easily capture and replay the wireless signal from the ISM band remote control. Create a catch. You only need to enter the "Catching" menu, set the frequency of the remote control key, press the red "R" recording button, and then press the key on the remote control. Then stop recording to save to the storage card. Now you can enter the replay menu, select the file you just recorded and click play. The exact same signal will be transmitted through the air, effectively replacing your remote control key. TX Microphone: Using a 3.5mm audio jack, Portapack can also be used as a standard push to talk or voice activated walkie talkie radio. To plug the microphone into the audio jack, just press and hold the right button to press the call. If needed, you can also enable multiple CTCSS tones options, as well as tones that appear to be transmitted to the wireless headset Receiver: By connecting speakers to Portapack’s 3.5mm audio jack, you can easily listen to standard NFM and WFM audio signals. You can easily enable ADS-B reception on PortaPack by selecting the inductor and lightning symbol in the upper right corner. Hardware Configuration: 3.2in TFT 240 x 320 Screen Navigation Switch Audio Output Microphone Input DC 2.1 Interface 4 Layers of Gold Plating HAVOC Features Include: IQ File Playback Microphone FM Transmission with CTCSS CTCSS Decoder Frequency Manager (Save and load from storage card, with categories and comments) File Manager "Soundboard" wave file player (place 8 bit mono files) storage card wav directory) ADS-B Receiver with Map View SSTV Transmitter Fully Configurable Transmit Signal POCSAG Transmitter POCSAG Receiver Decoder Morse Transmitter (FM Tones and CW) OOK transmitter for common remote encoders (PT2262, Doorbell, Remote Socket, Some Garages) RDS (Radio Data System) PSN, RadioText and Time Group Transmitter Weather Radiosonde Receiver for M10 and M2K2... AFSK Receiver AFSK Transmitter (Bell202...) Nuoptix DTMF Synchronization Transmitter Universal Remote Control for TouchTunes Jukebox LCR (Language de Commande Routier) Message Generator Street Lighting Control Transmitter (CCIR Tones) "Play Dead" in an emergency Fully Configurable RF Signal Generator RSSI audio output as pitch (For irection finding) Features: 3.2in, 240 x 320 RGB LCD with Resistive Touch Screen. 4 Way Arrows Key, Rotating Jog Dial and Selection Button. Button battery for saving settings and date time. Miniature storage card slot for data and codes storage Function: SSB, AM, Narrowband FM, Wideband FM Audio Reception, with Spectrum Waterfall. Wideband (18MHz) Spectrum Analysis and Waterfall Chart. Monitoring of Ships (AIS), Automobiles (TPMS) and Utility Instrument Transponders (ITRON ERT). PM calibration can achieve more accurate tuning. Sleep mode saves power by only turning off the display. Illustrate: Then PortaPack should be suitable. Compatibility with Blue is experimental. A Blue owner reported good results, but there was little mechanical interference Between PortaPack audio capacitor and baseband connector. PortaPack requires an external battery. Any USB connected battery should work, although their quality varies greatly, and a poorly designed battery may inject regulator noise into the radio. The receiving sensitivity varies by frequency band, but the performance is not as good as a real amateur radio receiver. Package List 1 x Full Featured Radio Transceiver(Shipped with battery) 1 x Antenna 1 x USB Data Cable 1 x English User Manual
  • Fruugo ID: 356386609-774648461
  • EAN: 9582361165983

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

Delivery & Returns

Dispatched within 2 days

  • STANDARD: FREE - Delivery between Mon 06 October 2025–Fri 10 October 2025 - FREE

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • NO,606-23-220,MeinianGuojiGuangChangZhaoshangJiedaoNanHaidadao yixiShenzhenGuangdong
  • Shenzhen
  • CN
  • 518000
  • GoodLuck856@163.com
  • 8613164761511

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • SINO-SEAR GmbH
  • SINO-SEAR GmbH
  • Feuerbachstrasse 11, 14471 Potsdam, Germany
  • Potsdam
  • DE
  • 14471
  • info@sino-sear.com
  • 4933195130908