Feature: 1. Pure copper core motor ensures high speed, strong power, and energy saving。 2. Forward and reverse adjustable, the governor can realize 7‑speed speed regulation. 3. The maximum cutting depth is up to 40mm, and it supports angular cutting, which can meet the needs of daily use. 4. The machine is multi‑purpose, which can install drill chuck, can install sandpaper, polishing wheel, rounding device for different operations. 5. The mini table saw can be used for manual DIY, wood, metal, plastic, acrylic, etc. cutting, the upper drill chuck and corresponding accessories can be used for grinding, carving, drilling, etc. Specification: Item Type: Mini Table Saw.Material: Aluminum alloy, cold rolled steel, red copper, high speed steel Scope of Application: Can be used for manual DIY, wood, metal, plastic, acrylic, etc. cutting, and the upper drill chuck and corresponding accessories can be used for grinding, carving, drilling, etc. Motor Speed: 2000-12000r/min (seven speed regulation) Maximum Cutting Depth: Approx. 40mm / 1.6in Maximum Saw Blade Diameter: Approx. 110mm / 4.3in Suitable for the Inner Hole of the Saw Blade: Approx. 16mm / 0.6in, 20mm / 0.8in Drill Chuck Shaft Diameter: Approx. 10mm / 0.4in Motor and Spindle Speed Ratio: 1:3 Power Supply Voltage: DC12-24V Motor Power: 180W (product use power, not product use idling power) CW/CCW: Adjustable Angle Cutting: Support Table Saw Size: Approx. 280x200x150mm / 11x7.9x5.9in(After adding dust-proof board and bracket) 80 Tooth High Speed Steel Saw Blade Parameters: Aperture: Approx. 20mm / 0.8in Uses: Veneer, acrylic Package List: 1 x Table Saw1 x Aluminum Alloy Support (Including 2 Adjusting Screws)1 x Acrylic Dust Board2 x Aluminum Alloy Support Screws1 x Square1 x Hex Wrench1 x Brush1 x Saw Blade1 x Goggles1 x Power Adapter1 x Plug1 x User Manual Note: 1. The power supply must be cut off to install the saw blade. 2. The cutting direction and table grinding direction must be operated in accordance with the indicated direction. 3. To switch the direction, turn off the power first and then reverse the operation. 4. When using a table saw to cut, remove the accessories of the table grinder. When using a table grinder, be sure to remove the saw blade for thick use.