HABOTEST AC/DC Digital Clamp Meter True-RMS Multimeter Anto-Ranging Multi Tester Current Clamp with Amp Volt Ohm Diode Capacitance Resistance Continuity NCV Temperature Duty Ratio VFD Tests This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC voltage, AC/DC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key.  Features: CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/DC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection. WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit. LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal. MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key. SAFE E: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable. AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery. MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester. Note: *MUST read the user manual carefully before use for safety. *Battery not included. Parameters: Display: 6000 count Clamp Opening Size: 40mm Auto-off: approx. 15 minutes Max. Voltage Between Terminals and Earth Ground: AC750V or DC 1000V Range Resolution Accuracy DC Current (MAX current: 1000A) 60A 0.01A ±(2.5%reading+8) 600A 0.1A 1000A 1A AC Current (MAX current: 1000A, True RMS) Frequency range: 0.1~600A: 40Hz~400Hz 600~1000A: 40Hz~60Hz 60A 0.01A ±(2.5%reading+8) VFD: ±(5.0%reading+10) INRUSH: ±(5.0%reading+10) 600A 0.1A 1000A 1A DC Voltage Input impedance: 10MΩ(LoZ: 300kΩ) Overload conservation: AC750V/DC1000V Maximum input voltage: AC750V/DC1000V 600mV 0.1mV ±(0.5%reading+5) 6V 0.001V 60V 0.01V 600V 0.1V 1000V 1V ±(0.8%reading+5) AC Voltage Input impedance: 10MΩ(LoZ: 300kΩ) Overload conservation: AC750V/DC1000V Maximum input voltage: AC750V/DC1000V Frequency range: 40Hz~1kHz, True RMS 600mV 0.1mV ±(0.8%reading+5) 6V 0.001V 60V 0.01V 600V 0.1V 750V 1V ±(1.0%reading+5) VFD(750V) 0.1V ±(2.0%reading+5) Resistance Overload conservation: 250V 600Ω 0.1Ω ±(1.0%reading+5) 6kΩ 0.001kΩ 60kΩ 0.01kΩ 600kΩ 0.1kΩ 6MΩ 0.001MΩ 60MΩ 0.01MΩ Diode It displays the approximate forward voltage value of the diode. Forward DC current is about 1.5mA; Reverse DC voltage is about 3V; Overload conservation: 250V Continuity <approx. 30Ω, the buzzer sounds and the LED light on Test Voltage Approx. 1V Overload conservation: 250V Capacitance Overload conservation: 250V 10nF 0.001nF ±(4.0%reading+5) 100nF 0.01nF 1000nF 0.1nF 10μF 0.001μF 100μF 0.01μF 1000μF 0.1μF 10mF 0.001mF 100mF 0.01mF ±(5.0%reading+10) Frequency/Duty Ratio Overload conservation: 250V 10Hz 0.001Hz ±(1.0%reading+3) 100Hz 0.01Hz 1000Hz 0.1Hz 10kHz 0.001kHz 100kHz 0.01kHz 1000kHz 0.1kHz 10MHz 0.001MHz ±(3.0%reading+3) 1~99% 0.1% Temperature *The below precision does not inlcude the error of thermocouple probe. ℃ 1℃ ±3℃ (-20℃~0℃) ±1.0% or ±2℃ (0℃~400℃) ±2.0% (400℃~1000℃) ℉ 1℉ ±6℉ (-4℉~32℉) ±1.0% or 4℉ (32℉~752℉) ±2.0% (752℉~1832℉) Specifications: Brand: HABOTEST Material: ABS Color: Black and Red Battery: 2pcs, 1.5V, AAA alkaline battery (batteries not included) Item Size: 24*8*4.5cm / 9.44*3.14*1.77in Item Weight: 311g / 10.97oz Package Size: 27.5*13.5*5.5cm / 10.82*5.31*2.16in Package Weight: 620g / 21.86oz Packing List: 1 * Digital Clamp Meter 1 * Thermocouple 2 * Test Lead 1 * User Manual(English)