1、Hard Oxidized Cylinder Block: The cylinder is a hard oxidized cylinder block, which increases the surface hardness, is not easy to deform, and is compression resistant and durable. 2、High Strength Accuracy Guide Rail: The cylinder adopts high strength accuracy guide rail, which is not easy to loosen, the steel ball does not fall, the work is smooth, and the accuracy is high. 3、Circlip Super Sealing: The cylinder is equipped with a circlip super sealing and self lubricating seals to prevent gas blow by in the left and right chambers of the cylinder, with small errors and high working efficiency. 4、Can Bear Side Load: This finger cylinder can bear larger side load and moment, suitable for accuracy assembly. 5、Aluminum Alloy: This is a 0.7Mpa cylinder made of high quality aluminum alloy, strong and durable, not easy to damage. Item Type: Gripper Pneumatic Cylinder Material: Aluminum Alloy Model: MHZ2-16D Bore Diameter: Approx. 16mm / 0.63in Working Pressure: 0.1-0.7MPa Airs Inlet Thread: M5-0.8 Claw Distance When Closed: Approx. 14.9mm / 0.59in (There is an error of ±0.3mm in manual measurement) Claw Distance When Opening: Approx. 20.9mm / 0.82in (There is an error of ±0.3mm in manual measurement) Stroke: Approx. 6mm / 0.24in Outer Diameter Clamping Force: 34N Inner Diameter Clamping Force: 45N Environment and Fluid Temperature: -10~60℃ Repeatability: Approx. ±0.01mm / 0.0004in Maximum Frequency: 180c.p.m Give Oil: Not Needed Liquid: Airs Action Type: Double Action 1 x Finger Cylinder