Multi-scene measurement Adopting the main control chip, it has a higher and more stable experience, sensitive/stable/intelligent Place the instrument sensor at the gas tank switch port, and the screen simulation section rises to red with a sharp buzzer alarm indicating the presence of a combustible gas leak When the gas concentration exceeds 20% Ifl safety value,the screen simulation section rises and beeps, press the button to turn off/turn on the buzzer Extended bendable hose Using all-metal material, it can be bent arbitrarily, making long-distance detection more convenient Ambient temperature detection:-20.0℃ to 60.0℃ (-4.0°F to 140.0°F) Accuracy:0.0℃ to 45.0℃(32°F to 113°F)± 2.0℃/4.0°F Other: +3℃/6.0°F Resolution: 0.1/1 Response time:less than equal 500ppm:about 5 seconds;Less than 500ppm:about 2 seconds Alarm method:Analog segment display,buzzer alarm Automatic shutdown:If there is no operation meter for 10 minutes,it will automatically shut down. Cancel automatic shutdown:In the power-on state, place an order and press the power button to cancel the automatic shutdown. Sensor:Gas sensitive semiconductor Detection range:50-10000Pm (methane) Response sensitivity:Greater than 50ppm(methane) Adjustable sensitivity:High sensitivity/low sensitivity Temperature unit selection:°C/°F Warm-up time:About 30 seconds (The product printed words may vary depending on the batch, but this does not affect use) Color: As Shown Material: ABS Package Contents: 1 x Combustible Gas Detector Alarm