Feature:1. This engine solenoid valve can efficiently shut off the power within 2 seconds, ensuring the safety.2. Works stably with low current and no heat, the valve promises reliable working and long service life.3. The shutdown control is very practical, and allows for flexible application on various diesel engines.4. Made of high ABS material and stainless steel, the anticorrosive valve is very durable for long use.5. With small size and light weight, the installation is very convenient, and the wiring is also very easy.Specification:Item Type: Engine Stop ValveMaterial: ABS + Stainless SteelWorking Voltage: 12V (9-15V DC)Full Load Operating Current: 12V-2.0A (automatically cut off when the actuation is reached and the working current is lower than 15mA)Control Wire Working Current: <15mAWorking Stroke: 451mmMaximum Pulling Force: 100NEnvironment Temperature: -30~60Action Time: 2sFunction: Flameout. .Package List:1 x Engine Stop Valve1 x Connector1 x User ManualNote:During installation and debugging, make sure that the stop lever of the diesel engine does not move to the limit position before the extinguisher is stuck, otherwise the internal overload protection circuit of the extinguisher will act and the extinguisher will automatically stop working. At this time, the power supply of the extinguisher should be disconnected. After adjusting the installation position, power on the flame extinguisher again, and the flame extinguisher can resume normal operation.