Plm-25 is a 25W economical AC/DC LED power supply series. The Plm-25 has a built-in active Pfc design and provides a high-power factor value greater than 0.9. In addition, with the low no-load power consumption below 0.5W, and the installation time of less than 500 Ms, the Plm-25 is met with the Erp regulation required by the European Union for lighting fixtures. The Plm-25 is a Class Ii power unit (without Fg pins) housed with Ul 94V-0 rated flame retardant plastic box. The I/O terminals are designed with screwless clamp-type terminal block which greatly simplifies wiring installation. Two types of models with different input voltage ranges are offered: the Plm-25 series, which operates from 110-295 Vac, and the Plm-25E series, which operates from 180-295 Vac. These two series are both constant current output designs and deliver models with a current of 350 Ma, 500 Ma, 700 Ma and 1050 Ma. models with only 230 Vac or Full Range (up to 295 Vac) Available • Built-in active PFC function • Constant current design • Protection: Short circuit • Free air convection cooling • Fully insulated plastic housing • Class II power unit, no Fg • Class 2 power unit (for Plm-25-500/700/1050) • No-load power consumption