Item Type: Card Reader <br>Optional Style: ID Card, IC Card <br>Material: Zinc Alloy + Acrylic <br>Card Reader Type: for EM card <br>Barcode Type: QR, barcode <br>Communication Method: For Wiegand 26/34/RS232/RS485/TTL <br>Working Frequency: 125 (Khz) <br>Decoding Mode: Image decoding <br>Reading Direction (barcode): 45° inclined plane with the lens as the center point <br>Scan Coding Features: Automatic induction, buzzer prompt <br>Working Voltage: 8-12V <br>Working Current: 800mA <br>Card Reading Distance (card): Approx. 3 ~ 6cm / 1.2 ~ 2.4in <br>Reading Distance (QR): Approx. 0 ~ 20cm / 0 ~ 7.9in <br>Reading Speed: <200ms <br>Operating System: For WindowsXP/7/8/10)/Linux <br>Light: Standby state (blue light is on normally), card reading/scanning state (green light is on for about 0.5s) <br>Built-in Horn: Buzzer <br>Line Sequence Definition: <br>for Wiegand 26/34RS485RS232 <br>Red wire: 12VRed wire: 12VRed wire: 12V <br>Black wire: GNDBlack wire: GNDBlack wire: GND <br>Green Wire: D0Brown wire: 485ABlue wire: RX <br>White Wire: D1Orange wire: 485BYellow wire: TX <br>Note: <br>1. The access control card reader cannot store user data and information, and cannot add card users, password users, and fingerprint users. It is only an expanded card or password unlocking tool, which can only be used with access control integrated machines, card time attendance machines and other equipment. <br>2. When installing/removing, please turn off the power first and do not operate with power. <br>3. The maximum reading distance is in a non-interference environment, the card reader is installed in the correct way, and the card is measured parallel to the surface of the card reader, any electromagnetic interference environment will affect the reading distance. <br>4. Do not install the card reader on the surface of magnetic or metal objects. Magnetic and metal materials will seriously affect the RF signal <br>5. Do not install the card reader near devices that produce interference electromagnetic fields, such as motors, AC/DC converters, UPS, relays, monitors, etc. <br>6. The power supply should make sure sufficient power, try to use a linear power supply, and the door lock and controller should be powered separately. Install the power supply as close as possible to the electrical equipment to avoid interference and transmission loss. <br>7. It is recommended to pay attention to separate the strong and weak current when wiring, and the separation requirement is greater than 20cm. The power cord should be a multi-stranded wire with a sufficiently thick wire diameter.1、Adopt standard 86 box industry standard, fast scanning speed and high recognition rate. <br>2、Strong compatibility, can be connected to any controller that supports for Wiegand input. <br>3、Widely used in business office building visitor entry management, scenic tourist staff management, community visitor entry and exit management, smart home, etc. <br>4、Achieve perfect upgrades for traditional credit card systems in various industries. <br>5、Small size, easy to carry and store, convenient to use and with good performance.1 x Card Reader&nbsp;